A-286 “40-50% CR” (CAP 210 KSI)

A-286 210 KSI Cold Reduced is a nickel and iron-based austenitic superalloy that is annealed and cold worked to produce a tensile strength of 210 KSI. This alloy is useful for parts, such as fasteners, requiring room-temperature minimum tensile strength of 200 KSI (1379 MPa) after precipitation heat treatment for use up to 1000 F (538 C) and having oxidation resistance up to 1200 F (649 C). A-286 Cold Reduced has wide applications in high temperature fasteners, springs, jet engine components, offshore oil and gas turbines. (UNS S66286)

Common Applications

  • AerospaceAerospace
  • IndustrialIndustrial

Benefits

  • Good Creep Properties
  • Good Stress Rupture Properties
  • High Strength
  • Corrosion Resistant
  • Oxidation Resistance

Request a Quote

A-286 “40-50% CR” (CAP 210 KSI)

We Stock A-286 “40-50% CR” (CAP 210 KSI) to the Following Specifications:

  • AMS-5726 CHEM & PHYS
  • AMS-5731 CHEM ONLY
  • AMS-5732 CHEM ONLY
  • AMS-5734 CHEM ONLY
  • AMS-5736 CHEM ONLY
  • AMS-5737 CHEM ONLY
  • HI SHEAR #140 TYPE 2
  • SPS-M-250 CHEM & PHYS G/S 5 MIN CK TR
  • GE-S-SPEC-1
  • GE-S-SPEC-35

Chemical Makeup

ElementMinMax
Carbon, C-0.08
Manganese, Mg-2
Silicon, Si-1
Phosphorus, P-0.025
Sulfur, S-0.025
Chromium, Cr13.516
Nickel, Ni2427
Molybdenum, Mo11.5
Titanium, Ti1.92.35
Boron, B0.0030.01
Vanadium, V0.10.5
Cobalt, Co-1
Aluminum, Al-0.35
Copper, Cu--0.5

Cross-Fittings

Round

There are 35 sizes and conditions.

  • .260 - CG
  • 17/64 - CG
  • 9/32 - CG
  • 19/64 - CG
  • .3225 - CG
  • 21/64 - CG
  • 23/64 - CG
  • .385 - CG
  • 25/64 - CG
  • 13/32 - CG
  • .4475 - CG
  • 29/64 - CG
  • 15/32 - CG
  • 31/64 - CG
  • .510 - CG
  • 33/64 - CG
  • 17/32 - CG
  • 35/64 - CG
  • .5725 - CG
  • 19/32 - CG
  • 39/64 - CG
  • .635 - CG
  • 41/64 - CG
  • 43/64 - CG
  • .760 - CG
  • 49/64 - CG
  • 25/32 - CG
  • .785 - CG
  • .885 - CG
  • 29/32 - CG
  • 1.010 - CG
  • 1.135 - CG
  • 1.260 - CG
  • 1.385 - CG
  • 1.510 - CG

Flat

There are no sizes and conditions for the flat cross-section.

Square

There are no sizes and conditions for the square cross-section.

Hex

There are no sizes and conditions for the hex cross-section.