A-286 ST

A-286 Solution Treated is a nickel and iron-based austenitic superalloy. This alloy is useful for applications requiring high strength and corrosion resistance up to 1300F (704C) and for lower-stress applications at higher temperatures. The mechanical properties of this material are developed by suitable solution annealing and precipitation hardening treatments. This alloy has excellent high-temperature oxidation resistance and is designed to maximize creep and stress rupture properties, with some reduction in strength. A-286 Solution Treated steel can attain high strength levels when aged after cold work and has wide applications in high-temperature fasteners, springs, jet engine components, offshore oil and gas turbines. (UNS S66286)

Common Applications

  • AerospaceAerospace
  • IndustrialIndustrial

Benefits

  • Good Creep Properties
  • Good Stress Rupture Properties
  • High Strength
  • Corrosion Resistant
  • Oxidation Resistance

Request a Quote

A-286 ST

We Stock A-286 ST to the Following Specifications:

  • AMS-5731
  • AMS-5732 CAP. OF
  • HI SHEAR #140 TYPE 3 CHEM ONLY
  • MS-301
  • GE-S-SPEC-1
  • GE-S-SPEC-35
  • CPW-100
  • PWA-300
  • ASQR-01
  • MCL F-14
  • MCL F-17
  • MCL F-23

Chemical Makeup

ElementMinMax
Carbon, C-0.08
Manganese, Mg-2
Silicon, Si-1
Phosphorus, P-0.025
Sulfur, S-0.025
Chromium, Cr13.516
Nickel, Ni2427
Molybdenum, Mo11.5
Titanium, Ti1.92.35
Boron, B0.0030.01
Vanadium, V0.10.5
Cobalt, Co-1
Aluminum, Al-0.35
Copper, Cu--0.5

Cross-Fittings

Round

There are 34 sizes and conditions.

  • 3/16 - CG
  • .1975 - CG
  • 7/32 - CG
  • 1/4 - CG
  • .260 - CG
  • 5/16 - CG
  • .3225 - CG
  • 3/8 - CG
  • .385 - CG
  • 7/16 - CG
  • .4475 - CG
  • 1/2 - CG
  • .510 - CG
  • 9/16 - CG
  • .5725 - CG
  • 5/8 - CG
  • .635 - CG
  • 11/16 - CG
  • 3/4 - CG
  • 13/16 - CG
  • 7/8 - CG
  • 15/16 - CG
  • 1 - CG
  • 1.010 - CG
  • 1-1/8 - CG
  • 1-1/4 - CG
  • 1-3/8 - CG
  • 1-1/2 - CG
  • 1-3/4 - CG
  • 2 - CG
  • 2-1/4 - CG
  • 2-1/2 - CG
  • 3 - CG
  • 4 - RT

Flat

There are no sizes and conditions for the flat cross-section.

Square

There are no sizes and conditions for the square cross-section.

Hex

There are no sizes and conditions for the hex cross-section.