WASPALOY CR

Waspaloy Cold Reduced (Type 1) is a cold worked nickel-base alloy with excellent high temperature strength and good resistance to oxidation at temperatures up to 1600 F. Waspaloy has higher stability and strength ranges than those available for alloy 718. Waspaloy is available as Type 1 Solution heat-treated, cold reduced and centerless ground and Type 2 Solution heat treated and centerless ground per AMS-5708. This corrosion and heat-resistant nickel alloy product is typically used for parts, such as bolts and turbine blades, requiring high strength up to 1500 F (816 C) and oxidation resistance up to 1750 F (954 C). Waspaloy is often used in extreme environments and is common in gas turbine engine components. (UNS N07001)

Common Applications

  • AerospaceAerospace
  • IndustrialIndustrial

Benefits

  • Excellent High Temperature Strength
  • Good Oxidation Resistance

Request a Quote

WASPALOY CR

We Stock WASPALOY CR to the Following Specifications:

  • AMS-5708 CHEM ONLY
  • AMS-5709 CHEM ONLY
  • SPS-M-175 EXC. HARDNESS
  • VALLEY TODECO VMS-112 EXC. HARDNESS
  • VOI SHAN VSM-1333 EXC. HARDNESS
  • VOI SHAN-S-71001J EXC. HARDNESS

Chemical Makeup

ElementMinMax
Carbon, C0.02 0.1
Manganese, Mg--0.1
Silicon, Si--0.15
Phosphorus, P--0.015
Sulfur, S--0.015
Chromium, Cr1821
Cobalt, Co1215
Molybdenum, Mo3.55
Titanium, Ti2.753.25
Aluminum, Al1.21.6
Boron, B0.0030.01
Zirconium, Zr0.020.08
Iron, Fe--2
Copper, Cu--0.1
Lead, Pb--0.0005
Bismuth, Bi--3.0E-5
Selenium, Se--0.0003

Cross-Fittings

Round

There are 11 sizes and conditions.

  • .220 - CG
  • .260 - CG
  • .270 - CG
  • .3225 - CG
  • .328 - CG
  • .385 - CG
  • .448 - CG
  • .524 - CG
  • .540 - CG
  • .5725 - CG
  • .765 - CG

Flat

There are no sizes and conditions for the flat cross-section.

Square

There are no sizes and conditions for the square cross-section.

Hex

There are no sizes and conditions for the hex cross-section.